Operating Instructions

Important Safety Precaution Do not overload unit with vinyl sleeves. Max: one sleeve supply pack (Pre-packed 1000 pc.) For safety reasons, use only standardized vinyl sleeves designed for RainSafe. Place unit on a level surface.
How to load the Vinyl Pack Open the top cover of the unit (fig.1). Pull out the sleeve hanger (fig. 2). Remove the plastic retaining strap from the sleeve-holding bracket. Insert sleeve hanger into the sleeve-holding bracket (fig.3). Move sleeves toward the back of the sleeve-hanger and remove sleeve-holding bracket (fig. 4). Insert assembly back into the unit.
How to Prepare Unit for Use Slide the first sleeve into the delivery position (fig. 5). Close unit cover ensuring that the flat spring is positioned inside the first vinyl sleeve.
How to Use Place umbrella straight down into the vinyl sleeve (fig. 6). Pull out umbrella towards the front of the unit (fig. 7).
Pop-Up Panel User Instruction Display Mount the Pop-Up Panel on top cover. Use the center hole at the rear of the cover to attach the display using the nut and bolt supplied
Specification Item : Wet Umbrella Wrapper Dimension : 12.5"(W) x 9.7"(D) x 32.7"(H) Bottom plate : 9.75"(W) x 13.4"(D) Weight L 22 lbs. Material : Stainless steel Load : Maximum 1,000 sheet of vinyl sleeves.

Warranty Information

RainSafe warrants this product against any defects in material or workmanship for a period of one year from the date of original purchase. This shall not apply if the product has been damaged due to abuse, misapplication, accident, or as a result of service or modification not approved by RainSafe.